All of the great features of the NanoFoamer with a powerful, rechargeable battery. Ultra-powerful version with 3.7V Li-ion rechargeable battery and two-speed options. The best microfoamed milk you can produce without a steam wand. The NanoFoamer Lithium shares all of the above improvements of the NanoFoamer V2 with additional upgrades.
WHAT’S NEW:
Click-On NanoScreens: Our new NanoScreens ditch the pressure fit system for a satisfying snap-fit, ensuring a far stronger hold on the impeller while simultaneously preventing buckling over time.
Replaceable Impeller: Replace the all-important impeller as anytime in the event your NanoFoamer takes an unfortunate tumble.
Upgraded Impeller Material: The impeller material is upgraded to Polycarbonate (still BPA free & FDA certified), making it more resistant to the stresses of the fast rotations in hot liquids.
Improved Waterproofing: Overall better seals on the closures and shaft.
Better Motor: The upgraded motor is more powerful, built to tighter tolerances, and more reliable.
Stainless Steel Housing: The motor housing is now made of real brushed stainless steel for a far more premium experience.
More Stable Shaft: Tighter tolerances deep inside the motor translate directly onto the shaft’s stability. Spinning dead center is key to spinning fast and reducing vibrations.
On/Off Digital Switch: The upgraded button is a feather-light on/off switch, allowing you to focus on the foam while holding the NanoFoamer as lightly as a pencil.
Safety PCB: Auto shut off after ninety seconds to prevent the ultra-fast motor from overheating the housing.
New Battery Housing: The internal design is as beautiful as the outside, with the batteries fitting directly into the handle and connecting with premium spring-loaded contacts.
Reduced Vibrations: The new internal design is built to much tighter tolerances, keeping everything snug to reduce all vibrations from the handle.
All New Engineering: Better internal engineering with sonic welded components instead of snap-fitted parts.
Powerful Li-ion battery: A powerful 3.7V 1200Mah lithium-ion battery gives this product superpowers up to 14k RPM and very high torque.
Dual-speed: This NanoFoamer is so powerful, that we had to slow it down, so we built it with a multi-touch switch for selecting one of two speeds.
Battery Level Indicator: Four LEDs quickly show you when you should consider recharging.
USB Type C: USB-C is the connector of choice for all the best electronics on the market today, so you can recharge your NanoFoamer with any USB charger you already own.
TECH SPECS:
Power: 3.7V Li-Ion Battery (1300mAh)
Speed: Dual Speed (4k RPM Submerged)
Dimensions: 234 x 35 x 35mm
Weight: 135 g
Rechargeable: Yes, via USB-C
NanoScreens: Fine & Superfine
Impeller: Polycarbonate (Replaceable)
Waterproof: Yes
Protective Hood & Wall Mount: Included
Patented: Yes
