Product categories
-
Out of Stock
$30.00Delicious homemade cold brew coffee, however you like it! The Mizudashi Coffee Maker offers a simple method for making cold brewed coffee at home. Simply add ground coffee to the fine mesh basket, add water and leave in the refrigerator to brew. This pot also has a removable filter, making cleaning easy. Grind coffee coarse for a lighter more delicate coffee, or finer for a cold brew with more body and strength.
- Easy to clean up with its removable filter – simply wash and reuse
- Features a slender spout for slow, steady and controlled pouring. Brew and serve directly from glass coffee server
- Made with high-quality Hario heatproof glass
- Made in Japan
- Dishwasher safe
- Capacity: 5 cups
- Brew volume: 1 Litres / 1000mL
- W: 138mm ×D: 94mm ×H: 294mm
-
Out of Stock
$44.00Wine bottle shaped cold brew coffee bottle
Just by adding coffee grounds and water, you can make iced coffee. Put coffee grounds in the strainer, and place the lid. Set the spout and pour small amounts of water inside. Once the water is poured, put the stopper and gently shake the bottle to start the extraction. Refrigerate for approximately 8 hours for the cold brew to complete.
Disclaimer: Product(s) colour may slightly vary due to photographic lighting sources and/or your device monitor settings.
– 750ml (5 Cups) Capacity
– H30cm; W8.7cm; D8.4cm
– Borosilicate Glass
– Silicone Spout
– Removable Rubber Lid
– Heatproof Glass
– Dishwasher Safe -
Out of Stock
$44.00Wine bottle shaped cold brew coffee bottle
Just by adding coffee grounds and water, you can make iced coffee. Put coffee grounds in the strainer, and place the lid. Set the spout and pour small amounts of water inside. Once the water is poured, put the stopper and gently shake the bottle to start the extraction. Refrigerate for approximately 8 hours for the cold brew to complete.
Disclaimer: Product(s) colour may slightly vary due to photographic lighting sources and/or your device monitor settings.
– 750ml (5 Cups) Capacity
– H30cm; W8.7cm; D8.4cm
– Borosilicate Glass
– Silicone Spout
– Removable Rubber Lid
– Heatproof Glass
– Dishwasher Safe -
Out of Stock
$44.00Wine bottle shaped cold brew coffee bottle
Just by adding coffee grounds and water, you can make iced coffee. Put coffee grounds in the strainer, and place the lid. Set the spout and pour small amounts of water inside. Once the water is poured, put the stopper and gently shake the bottle to start the extraction. Refrigerate for approximately 8 hours for the cold brew to complete.
Disclaimer: Product(s) colour may slightly vary due to photographic lighting sources and/or your device monitor settings.
– 750ml (5 Cups) Capacity
– H30cm; W8.7cm; D8.4cm
– Borosilicate Glass
– Silicone Spout
– Removable Rubber Lid
– Heatproof Glass
– Dishwasher Safe -
Out of Stock
$42.00The original NanoFoamer is a revolutionary hand-held milk foamer that will froth the best silky smooth bubble-free milk for all your drinks, as well as instantly create cappuccinos and lattes. Made with incredible durability, the stainless steel milk foamer uses Nano Screens to achieve cafe quality frothed milk, only taking 20 seconds for the perfect texture. The 5mm thick stainless steel drive shaft ensures the NanoFoamer has a controlled and sturdy rotation that will operate wobble-free for years to come. Due to this stability high speeds in the impeller are possible, making quick work of any regular jug of milk.
FEATURES
- Texture Silky Milk – As good as you’d get from using an Espresso Machine.
- Choose your Preferred Milk – Cappuccino, Latte or Flat White style milk.
- Interchangeable Nano-screens – Can be used with, or without screens to make different style textures.
- Heavy Duty Shaft – Thick, rigid shaft ensures no accidental bends during use for optimal rotation.
- High Speed Impeller – Fast and efficient at working air in to your milk so it’s done under 20 secs.
- Wall Mount – Able to be cleanly attached on to the wall in your kitchen or by your coffee making area.
- Easy to Clean – Run the whole NanoFoamer under the tap as it’s water proof.
- Operated with two AA batteries.
*Batteries NOT included.
-
Out of Stock
$80.00All of the great features of the NanoFoamer with a powerful, rechargeable battery. Ultra-powerful version with 3.7V Li-ion rechargeable battery and two-speed options. The best microfoamed milk you can produce without a steam wand. The NanoFoamer Lithium shares all of the above improvements of the NanoFoamer V2 with additional upgrades.
WHAT’S NEW:
Click-On NanoScreens: Our new NanoScreens ditch the pressure fit system for a satisfying snap-fit, ensuring a far stronger hold on the impeller while simultaneously preventing buckling over time.
Replaceable Impeller: Replace the all-important impeller as anytime in the event your NanoFoamer takes an unfortunate tumble.
Upgraded Impeller Material: The impeller material is upgraded to Polycarbonate (still BPA free & FDA certified), making it more resistant to the stresses of the fast rotations in hot liquids.
Improved Waterproofing: Overall better seals on the closures and shaft.
Better Motor: The upgraded motor is more powerful, built to tighter tolerances, and more reliable.
Stainless Steel Housing: The motor housing is now made of real brushed stainless steel for a far more premium experience.
More Stable Shaft: Tighter tolerances deep inside the motor translate directly onto the shaft’s stability. Spinning dead center is key to spinning fast and reducing vibrations.
On/Off Digital Switch: The upgraded button is a feather-light on/off switch, allowing you to focus on the foam while holding the NanoFoamer as lightly as a pencil.
Safety PCB: Auto shut off after ninety seconds to prevent the ultra-fast motor from overheating the housing.
New Battery Housing: The internal design is as beautiful as the outside, with the batteries fitting directly into the handle and connecting with premium spring-loaded contacts.
Reduced Vibrations: The new internal design is built to much tighter tolerances, keeping everything snug to reduce all vibrations from the handle.
All New Engineering: Better internal engineering with sonic welded components instead of snap-fitted parts.
Powerful Li-ion battery: A powerful 3.7V 1200Mah lithium-ion battery gives this product superpowers up to 14k RPM and very high torque.
Dual-speed: This NanoFoamer is so powerful, that we had to slow it down, so we built it with a multi-touch switch for selecting one of two speeds.
Battery Level Indicator: Four LEDs quickly show you when you should consider recharging.
USB Type C: USB-C is the connector of choice for all the best electronics on the market today, so you can recharge your NanoFoamer with any USB charger you already own.TECH SPECS:
Power: 3.7V Li-Ion Battery (1300mAh)
Speed: Dual Speed (4k RPM Submerged)
Dimensions: 234 x 35 x 35mm
Weight: 135 g
Rechargeable: Yes, via USB-C
NanoScreens: Fine & Superfine
Impeller: Polycarbonate (Replaceable)
Waterproof: Yes
Protective Hood & Wall Mount: Included
Patented: Yes -
Out of Stock
$55.00
A complete rebuild of our original NanoFoamer™ with more robust materials and engineering. AA battery-operated microfoam milk maker. The best microfoamed milk you can produce without a steam wand. Re-engineered from the ground up.
WHAT’S NEW:
Click-On NanoScreens: Our new NanoScreens ditch the pressure fit system for a satisfying snap-fit, ensuring a far stronger hold on the impeller while simultaneously preventing buckling over time.
Replaceable Impeller: Replace the all-important impeller as anytime in the event your NanoFoamer takes an unfortunate tumble.
Upgraded Impeller Material: The impeller material is upgraded to Polycarbonate (still BPA free & FDA certified), making it more resistant to the stresses of the fast rotations in hot liquids.
Improved Waterproofing: Overall better seals on the closures and shaft.
Better Motor: The upgraded motor is more powerful, built to tighter tolerances, and more reliable.
Stainless Steel Housing: The motor housing is now made of real brushed stainless steel for a far more premium experience.
More Stable Shaft: Tighter tolerances deep inside the motor translate directly onto the shaft’s stability. Spinning dead center is key to spinning fast and reducing vibrations.
On/Off Digital Switch: The upgraded button is a feather-light on/off switch, allowing you to focus on the foam while holding the NanoFoamer as lightly as a pencil.
Safety PCB: Auto shut off after ninety seconds to prevent the ultra-fast motor from overheating the housing.
New Battery Housing: The internal design is as beautiful as the outside, with the batteries fitting directly into the handle and connecting with premium spring-loaded contacts.
Reduced Vibrations: The new internal design is built to much tighter tolerances, keeping everything snug to reduce all vibrations from the handle.
All New Engineering: Better internal engineering with sonic welded components instead of snap-fitted parts.TECH SPECS:
Power: 2 x AA Batteries
Speed: Single Speed (3k RPM Submerged)
Dimensions: 234 x 35 x 35mm
Weight: 104 g
Rechargeable: No
NanoScreens: Fine & Superfine
Impeller: Polycarbonate (Replaceable)
Waterproof: Yes
Protective Hood & Wall Mount: Included
Patented: Yes*Batteries NOT included.
-
Out of Stock
$70.00
ERGONOMIC
The only latte art pouring jug featuring a comfortable ergonomic heat-resistant handle.
CUSTOM SPOUT
Designed to make it easy for beginners and ultra detailed for the pros.
STOVETOP READY
Warm up your milk without a steam wand or large espresso machine, thanks to the heat resistant handle.The FlowTip Jug is NOT microwave safe as it is made of stainless steel.
Capacity: 450ml (15 oz) -
Out of Stock
$30.00
The new style set that can be used for both Coffee and Tea!
Featuring the iconic Hario V60 dripper as well as a meshed cover for the server to strain your tea, this 2 way coffee and tea set is a versatile brewer for brewing at home.Server capacity: 1L
This set includes:
– Hario Plastic V60 02 Dripper
– Hario V60 02 Paper Filters 40 sheets
– Glass Server
– Server cover with mesh*Product is a dark brown colour.*
-
Out of Stock
$25.00
This little kettle is perfect for beginners or travelers. It’s durable and heat resistant. Perfect for brewing small batches of coffee. The material is very lightweight and gives the user more control over the pour stream. This kettle is tiny and can fit in any cabinet, drawer or camping bag. Winner of the 2020 Good Design Award.
– W177 × D78 × H128mm
– Practical Capacity 350ml
– Heatproof temperature: 100 C/ 212 F
– Material: PCT Resin
– Made in Japan -
Out of Stock
$96.00
Hario V60 kettle is very popular amongst baristas, coffeehouses and coffee lovers at home. It is unique and very reliable, that is why it is highly rated by coffee experts worldwide. Hario is known to manufacture and invent brilliant coffee equipment, so it is not a accident that the Buono drip kettle is highly rated. You will not come across many better kettles than the V60 kettle from Hario.
Capacity: 1200ml (full capacity)
Size: W292 × D144 × H147mm
Material: stainless steel (body, lid) / phenol resin (handle, knob of lid)
Not suitable for use in a microwave
Suitable for gas, electric, induction and halogen stoves
Made in Japan -
Out of Stock
$15.00
A dripper that can brew coffee in a single pour. This dripper lacks internal ribbing, so paper filters stick to it as coffee flows down the star-shaped grooves to slowly brew. You can also remove the holder to place just the dripper on a stand to brew.
Makes 1 to 2 cups of coffee
Uses the Hario V60 02 paper filters -
Out of Stock
$12.00
The V60 is iconic and recognized worldwide for it’s functionality and design. The V60’s conical shape allows for deeper layering of coffee grounds, and its spiral ridges and lack of flow restriction allow the user to pour the water quickly for a delicate body or slowly for a heavier flavor. Perfect for cafe or home use!
Capacity: 1-4 cups
For use with the Hario V60 02 paper filters.
-
Out of Stock
$35.00
A dripper that can brew coffee in a single pour. This dripper lacks internal ribbing, so paper filters stick to it as coffee flows down the star-shaped grooves to slowly brew. You can also remove the holder to place just the dripper on a stand to brew.
Makes 1 to 2 cups of coffee
Uses the Hario V60 02 paper filters -
Out of Stock
$50.00
Bringing back retro products from HARIO’s 100 year history
Join us on a trip down memory lane! Hario brought their Mini Coffee Dripper back from 1980.
In 1980, coffee imports increased as coffee transitioned from being a luxury product to a drink that could be enjoyed in various forms, including canned and instant varieties. The Mini Coffee Dripper was created following various experiments in search of a simpler way to reproduce the cloth style filtered coffee.
The prototype of the V60 dripper was made with steel wires and a makeshift paper filter that were in the company’s glass testing room. Out of convenience, this little star was born!
Compatible with V60 01 size filters.
240ml max capacity. -
Out of Stock
$60.00
This modified V60 dripper is a hybrid method that allows you to brew like a standard V60 pourer or immersion brewer. Simply add ground coffee, a standard 02 V60 filter and hot water. Let the coffee steep and flip the switch to start the draw down process. You can also use this to make tea with the same process. The dripper comes with a 40 pack of 02 white filters.
Features:
– Capacity: Dripper Finished Capacity 200ml
– Easy to use dripper that makes a great cup of coffee with one push
– Stunning aesthetic design with spiral ribs
– Makes 200 ml a cup
– Comes with a brewing guide and user manual
-Not suitable for use in microwave
– All parts can be removed for cleaning. When re-assembling, please read the instruction thoroughly to ensure that all parts are set up properly.
– Wash with soft sponge and neutral detergent.
– Handle with care as the switch is very delicate.
– The switch part is not available for sale on its own.Materials:
Glass bowl: Heat resistant glass
Base: Silicone rubber
Switch: PCT resin
Stainless ball: 13mm Stainless steel
Made in Japan
