Milk Foamers

The original NanoFoamer is a revolutionary hand-held milk foamer that will froth the best silky smooth bubble-free milk for all your drinks, as well as instantly create cappuccinos and lattes. Made with incredible durability, the stainless steel milk foamer uses Nano Screens to achieve cafe quality frothed milk, only taking 20 seconds for the perfect texture. The 5mm thick stainless steel drive shaft ensures the NanoFoamer has a controlled and sturdy rotation that will operate wobble-free for years to come. Due to this stability high speeds in the impeller are possible, making quick work of any regular jug of milk.

FEATURES

• Texture Silky Milk – As good as you’d get from using an Espresso Machine.
• Choose your Preferred Milk – Cappuccino, Latte or Flat White style milk.
• Interchangeable Nano-screens – Can be used with, or without screens to make different style textures.
• Heavy Duty Shaft – Thick, rigid shaft ensures no accidental bends during use for optimal rotation.
• High Speed Impeller – Fast and efficient at working air in to your milk so it’s done under 20 secs.
• Wall Mount – Able to be cleanly attached on to the wall in your kitchen or by your coffee making area.
• Easy to Clean – Run the whole NanoFoamer under the tap as it’s water proof.
• Operated with two AA batteries.

*Batteries NOT included.

All of the great features of the NanoFoamer with a powerful, rechargeable battery. Ultra-powerful version with 3.7V Li-ion rechargeable battery and two-speed options. The best microfoamed milk you can produce without a steam wand.  The NanoFoamer Lithium shares all of the above improvements of the NanoFoamer V2 with  additional  upgrades.

WHAT’S NEW:
Click-On NanoScreens: Our new NanoScreens ditch the pressure fit system for a satisfying snap-fit, ensuring a far stronger hold on the impeller while simultaneously preventing buckling over time.
Replaceable Impeller: Replace the all-important impeller as anytime in the event your NanoFoamer takes an unfortunate tumble.
Upgraded Impeller Material: The impeller material is upgraded to Polycarbonate (still BPA free & FDA certified), making it more resistant to the stresses of the fast rotations in hot liquids.
Improved Waterproofing: Overall better seals on the closures and shaft.
Better Motor: The upgraded motor is more powerful, built to tighter tolerances, and more reliable.
Stainless Steel Housing: The motor housing is now made of real brushed stainless steel for a far more premium experience.
More Stable Shaft: Tighter tolerances deep inside the motor translate directly onto the shaft’s stability. Spinning dead center is key to spinning fast and reducing vibrations.
On/Off Digital Switch: The upgraded button is a feather-light on/off switch, allowing you to focus on the foam while holding the NanoFoamer as lightly as a pencil.
Safety PCB: Auto shut off after ninety seconds to prevent the ultra-fast motor from overheating the housing.
New Battery Housing: The internal design is as beautiful as the outside, with the batteries fitting directly into the handle and connecting with premium spring-loaded contacts.
Reduced Vibrations: The new internal design is built to much tighter tolerances, keeping everything snug to reduce all vibrations from the handle.
All New Engineering: Better internal engineering with sonic welded components instead of snap-fitted parts.
Powerful Li-ion battery: A powerful 3.7V 1200Mah lithium-ion battery gives this product superpowers up to 14k RPM and very high torque.
Dual-speed: This NanoFoamer is so powerful, that we had to slow it down, so we built it with a multi-touch switch for selecting one of two speeds.
Battery Level Indicator: Four LEDs quickly show you when you should consider recharging.
USB Type C: USB-C is the connector of choice for all the best electronics on the market today, so you can recharge your NanoFoamer with any USB charger you already own.

TECH SPECS:
Power: 3.7V Li-Ion Battery (1300mAh)
Speed: Dual Speed (4k RPM Submerged)
Dimensions: 234 x 35 x 35mm
Weight: 135 g
Rechargeable: Yes, via USB-C
NanoScreens: Fine & Superfine
Impeller: Polycarbonate (Replaceable)
Waterproof: Yes
Protective Hood & Wall Mount: Included
Patented: Yes